LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2014 >> Versa Note S Plus >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Engine Control System (Introduction) >> System Description >> System >> Electric Ignition System >> ELECTRIC IGNITION SYSTEM: System Description >> Input/Output Signal Chart
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Input/Output Signal Chart

Sensor Input signal to ECM ECM function Actuator
Crankshaft position sensor (POS) Engine speed(3)
Piston position
Ignition timing control Ignition coil (with power transistor)
Camshaft position sensor (PHASE)
Mass air flow sensor Amount of intake air
Engine coolant temperature sensor Engine coolant temperature
Throttle position sensor Throttle position
Accelerator pedal position sensor Accelerator pedal position
Park/neutral position (PNP) switch(1) PNP signal
Transmission range switch(2)
Battery Battery voltage(3)
Knock sensor Engine knocking
Combination meter Vehicle speed(4)
(1) M/T models
(2) CVT models
(3) ECM determines the start signal status by the signals of engine speed and battery voltage.
(4) This signal is sent to the ECM through CAN communication line.