Diagnostic Test
- PERFORM WORK SUPPORT
Perform "INSIDE ANT DIAGNOSIS" on "Work support" of "INTELLIGENT KEY".
Refer to CONSULT FUNCTION (BCM - INTELLIGENT KEY) .
GO TO STEP 2 .
- PERFORM SELF-DIAGNOSTIC RESULT
Perform "Self Diagnostic Result" of "BCM" using CONSULT.
Are any DTCs detected?
YES
Refer to DTC INDEX .
NO
GO TO STEP 3 .
- CHECK PUSH-BUTTON IGNITION SWITCH
Check push-button ignition switch.
Refer to COMPONENT FUNCTION CHECK .
Is the operation normal?
YES
GO TO STEP 4 .
NO
Repair or replace malfunctioning parts.
- CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection normal?
YES
Check intermittent incident. Refer to INTERMITTENT INCIDENT .
NO
GO TO STEP 1 .