Work Procedure

WARNING: This page is about a different car, the 2016 Infiniti QX70. However, it is still accessible from the selected car via links, so may be relevant.

PERFORM ECM RE-COMMUNICATING FUNCTION
1. Install ECM.
2. Insert the registered Intelligent Key^* in key slot, turn ignition switch to "ON".
  * : To perform this step, use the key that has been used before performing ECM replacement.
3. Maintain ignition switch in the "ON" position for at least 5 seconds.
4. Turn ignition switch to "OFF".
5. Start engine.
Can engine be started?

YES

Procedure is completed.

NO

Initialize control unit.