Work Procedure When Replacing Air Bag Diagnosis Sensor Unit
- SAVING VEHICLE SPECIFICATION
CONSULT Configuration
Perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification.
NOTE:If "Before Replace ECU" of "Read / Write Configuration" cannot be used, use the "Manual Configuration" after replacing air bag diagnosis sensor unit.
GO TO STEP 2 .
- REPLACE AIR BAG DIAGNOSIS SENSOR UNIT
Replace air bag diagnosis sensor unit. Refer to REMOVAL AND INSTALLATION .
GO TO STEP 3 .
- WRITING VEHICLE SPECIFICATION
Perform "After Replace ECU" of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to WORK PROCEDURE .
Work End.