Component Inspection

1. Check main power window and door lock/unlock switch D5.

   Terminal		Main power window and door lock/unlock switch condition		Continuity
   10	9	Rear LH	UP	Yes
   10	7	Rear RH
   10	16	Front RH
   8	9	Rear LH	NEUTRAL
   6	7	Rear RH
   2	16	Front RH
   10	8	Rear LH	DOWN
   10	6	Rear RH
   10	2	Front RH
   1	12	-

2. Check continuity between main power window and door lock/unlock switch D5 (power window lock switch) (Lock operation).

   Terminal		Main power window and door lock/unlock switch condition		Continuity
   8	1	Rear LH	UP	No
   6		Rear RH
   2		Front RH
   8		Rear LH	NEUTRAL
   9
   7		Rear RH
   6
   2		Front RH
   16
   9		Rear LH	DOWN
   7		Rear RH
   16		Front RH

3. Check continuity between main power window and door lock/unlock switch D5 (power window lock switch) (Unlock operation).

   Terminal		Main power window and door lock/unlock switch condition		Continuity
   8	1	Rear LH	UP	Yes
   6		Rear RH
   2		Front RH
   8		Rear LH	NEUTRAL
   9
   7		Rear RH
   6
   2		Front RH
   16
   9		Rear LH	DOWN
   7		Rear RH
   16		Front RH

Is the inspection result normal?

YES 

Main power window and door lock/unlock switch is OK.

NO 

Replace main power window and door lock/unlock switch. Refer to REMOVAL AND INSTALLATION . After that, refer to WORK PROCEDURE .