Check Anti-Pinch Function: Description
If any of the following operations are performed, the initialization is necessary for normal operation of
anti-pinch function.
- Disconnection and connection of 12V battery cable from negative terminal.
- When main power window and door lock/unlock switch is replaced.
- Electric power supply to main power window and door lock/unlock switch or power window motor LH is
interrupted by blown fuse or disconnection and connection of the negative terminal of 12V battery, etc.
- Disconnection and connection of main power window and door lock/unlock switch harness connector.
- Removal of front power window motor LH from regulator assembly.
- Operation of regulator assembly as an independent unit.
- Removal and installation of glass.
- Removal and installation of door glass run.