Input Signal And Output Signal
Major signal transmission between each unit via communication lines is shown in the following table.
| Component | Signal description |
|---|---|
| Yaw rate/side G sensor | Mainly transmits the following signals to ABS actuator and electric unit (control unit) via communication line*
.
|
| Steering angle sensor | Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication.
|
| Combination meter | Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication.
|
* : Communication line between yaw rate/side G sensor and ABS actuator and electric unit (control unit)