April 5, 2026: LEMON Manuals is launched! Read the announcement.

Work Procedure

PERFORM ECM RECOMMUNICATING FUNCTION
1. Install ECM.
2. Insert the registered ignition key* into key cylinder, then turn ignition switch ON.
  *: To perform this step, use the key that is used before performing ECM replacement.
3. Maintain ignition switch in the ON position for at least 5 seconds.
4. Turn ignition switch OFF.
5. Start the engine.
GO TO STEP 2 .

PERFORM ADDITIONAL SERVICE WHEN REPLACING ECM

Perform WORK PROCEDURE .

Inspection End