Component Inspection
- CHECK POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH
- Turn ignition switch OFF.
- Disconnect power window and door lock/unlock switch RH connector.
- Check power window and door lock/unlock switch RH terminals under the following conditions.
Power window and door lock/unlock switch RH Condition Continuity Terminal 8 7 UP Yes 11 6 12 7 NEUTRAL 11 6 12 7 DOWN 8 6 Is the inspection result normal?
YES
Inspection End.
NO
Replace power window and door lock/unlock switch RH. Refer to REMOVAL AND INSTALLATION .