Special Repair Requirement

PERFORM ZERO POINT RESET
CONSULT
1. Perform preliminary checks.
  NOTE:
  - Level the vehicle.
  - Minimize vibrations near the vehicle.
  - Remove any objects on passenger seat.
  - Do not touch the vehicle during zero point reset.
2. Select "Start" on "Zero point reset function" from "Work support" of "OCCUPANT DETECTION".
3. "Zero point reset function" starts.
GO TO 2 .
CONFIRM RESET
1. Check that "Complete" is displayed on "Zero point reset status".
CAUTION:
- "Complete" may be displayed if the seat has been reinstalled or "zero point reset" has already been performed.
- "Incomplete" may be displayed if a new seat is installed.
- Air bag warning lamp blinks in user mode if zero point reset is "incomplete".
Is zero point reset status "complete"?

YES

Print out "Zero point reset current status" screen. Inspection end.

NO

Recheck the preliminary check items and perform zero point reset again.