Work Procedure
- SAVING VEHICLE SPECIFICATION (BCM)
CONSULT Configuration
Perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification. Refer to Description .
NOTE: If "Before Replace ECU" of "Read / Write Configuration" cannot be used, use the "Manual Configuration" after replacing BCM.GO TO 2 .
- SAVING VEHICLE SPECIFICATION (TPMS)
Perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification. Refer to Work Procedure (Before Replacement) .
NOTE: If "Before Replace ECU" of "Read / Write Configuration" cannot be used, use the "Manual Configuration" after replacing BCM.GO TO 3 .
- REPLACE BCM
Replace BCM. Refer to Removal and Installation .
GO TO 4 .
- WRITING VEHICLE SPECIFICATION (BCM)
Perform "After Replace ECU" of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to Description .
GO TO 5 .
- REGISTER INTELLIGENT KEYS
For initialization and registration of Intelligent Keys, refer to CONSULT Immobilizer mode and follow the on-screen instructions.
GO TO 6 .
- WRITING VEHICLE SPECIFICATION (TPMS)
Perform "After Replace ECU" of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to Work Procedure (After Replacement) .
GO TO 7 .
- INITIALIZE TPMS
Perform TPMS initialization. Refer to Work Procedure (After Replacement) .
WORK END