Front Wiper Control
IPDM E/R detects front wiper stop position by a front wiper auto stop signal.
When a front wiper auto stop signal is in the conditions listed below, IPDM E/R stops power supply to wiper after repeating a front wiper 10 second activation and 20 second stop five times.
|
Ignition switch |
Front wiper switch |
Auto stop signal |
|
ON |
OFF |
Front wiper stop position signal cannot be input 10 seconds. |
|
ON |
The signal does not change for 10 seconds. |
NOTE:
This operation status can be confirmed on the IPDM E/R "Data Monitor" that displays "BLOCK" for the item "WIP PROT" while the wiper is stopped.