Input Signal And Output Signal

Component

Signal description

ECM

Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication:

• Accelerator pedal position signal
• Engine speed signal
• Engine torque signal
• Target throttle position signal

Mainly receives the following signal from ABS actuator and electric unit (control unit) via CAN communication:

• Engine torque request signal

TCM

Mainly transmits the following signal to ABS actuator and electric unit (control unit) via CAN communication:

• Current gear position signal

Combination meter

Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication:

• Brake fluid level switch signal
• Parking brake switch signal

Mainly receives the following signals from ABS actuator and electric unit (control unit) via CAN communication:

• ABS warning lamp signal
• Brake warning lamp signal
• VDC OFF indicator lamp signal
• Slip indicator lamp signal

BCM

Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication:

• Stop lamp switch signal
• Brake pedal position switch signal
• Ignition switch ON signal

Chassis control module (with built in steering angle sensor)

Mainly transmits the following signals to ABS actuator and electric unit (control unit) via CAN communication:

• Steering angle sensor signal
• Steering angle sensor malfunction signal
• Intelligent trace control signal
• Active ride control signal