Work Procedure

1. CONSULT Select "Re/programming, Configuration".

When writing saved data>>

GO TO 2.

When writing manually>>

GO TO 3.

1. CONSULT: Select the operation according to the CONSULT screen.

YES>>

GO TO 4.

1. CONSULT
   1. Select "Manual selection".
   2. Identify the correct model and configuration list. Refer to Configuration List .
   3. Confirm and/or change setting value for each item.
      CAUTION:

      Thoroughly understand the vehicle specification. ECU control may not operate normally if the setting is not correct.

      NOTE:

      • If items are not displayed, select "Next".
      • Each item differs for each vehicle depending on specification.
   4. Select "Next".
   5. Select "OK".
      CAUTION:

      Make sure to select "OK" even if the indicated configuration of a brand new BCM is the same as the desirable configuration. If not, configuration, which is set automatically by selecting the vehicle model, cannot be memorized.

   6. Check that the configuration has been successfully written and select "End".

YES>>

GO TO 4.

1. Confirm that each function controlled by the BCM operates normally.

YES>>

Work End.