Component Inspection

1. With CONSULT:
   1. Start the engine.
   2. Select "ACTIVE GRILLE SHUTTER" in "ACTIVE TEST" mode of "ENGINE" using CONSULT.
   3. Touch "CALIBRTN".
   4. After the calibration completes, check the operation of active grille shutter as follows.

      Condition	Active grille shutter
      Select "CLOSE"	Close → Open
      Select "OPEN"	Open → Close

2. Without CONSULT
   1. Turn ignition switch OFF.
   2. Operate shutter by hands to close position.
   3. Check the operation of active grille shutter as follows.

      Condition	Active grille shutter
      Ignition switch: ON	Close → Open

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Replace active grille shutter.