Component Function Check

1. Turn ignition switch to START.

Are any cylinders ignited?

YES>>

GO TO 2.

NO>>

Refer to Diagnosis Procedure .

1. With CONSULT:
   1. Start engine.
   2. Perform "POWER BALANCE" in "ACTIVE TEST" mode of "ENGINE" With CONSULT:
   3. Check that each circuit produces a momentary engine speed drop.
2. Without CONSULT
   1. Start engine and let it idle.
   2. Listen to each fuel injector operating sound.

      Courtesy of NISSAN

      Clicking sound should be heard.

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Refer to Diagnosis Procedure .