Component Inspection

1. 1. Turn ignition switch OFF.
   2. Loosen the fixing bolt of the sensor.
   3. Disconnect intake camshaft position sensor harness connector.
   4. Remove the sensor.
   5. Visually check the sensor for chipping.

      Courtesy of NISSAN

Is the inspection result normal?

YES>>

GO TO 2.

NO>>

Replace intake camshaft position sensor. Refer to Exploded View .

1. Check resistance intake camshaft position sensor terminals as follows.

   Intake CMP sensor		Condition		Resistance
   Terminal
   1	2	Temperature	25°C (77°F)	Except 0 Ω
   	3
   2	3

Is the inspection result normal?

YES>>

INSPECTION END

NO>>

Replace intake camshaft position sensor. Refer to Exploded View .