Special Repair Requirement

1. CONSULT
   1. Perform preliminary checks:
      NOTE:

      • Level the vehicle
      • Minimize vibrations near the vehicle
      • Remove any objects on passenger seat
      • Do not touch the vehicle during zero point reset
   2. Select "Start" on "Zero point reset function" screen from "Work support" mode of "OCCUPANT DETECTION".
   3. "Zero point reset function" starts.

>>

GO TO 2.

1. CONSULT Check that "Complete" is displayed on "Zero point reset function".
   CAUTION:

   • "Complete" may be displayed if the seat has been reinstalled, or "Zero point reset function" has already been performed.
   • "Incomplete" may be displayed if a new seat is installed.
   • Air bag warning lamp flashes in user mode if zero point reset is "incomplete".

Is zero point reset status "complete"?

YES>>

Print out "Zero point reset current status" screen. Inspection End.

NO>>

Recheck the preliminary check items and perform zero point reset again.