Component Inspection

With CONSULT

1. Start the engine.
2. Select "ACTIVE GRILLE SHUTTER" in "ACTIVE TEST" mode of "ENGINE" using CONSULT.
3. Touch "CALIBRTN".
4. After the calibration completes, check the operation of active grille shutter as follows.

   Condition	Active grille shutter
   Select "CLOSE"	Close → Open
   Select "OPEN"	Open → Close

Without CONSULT

1. Turn ignition switch OFF.
2. Operate shutter by hands to close position.
3. Check the operation of active grille shutter as follows.

   Condition	Active grille shutter
   Ignition switch: ON	Close → Open

Is the inspection result normal?

>>

INSPECTION END

>>

Replace active grille shutter.