DTC P0571/52 Stop Light Switch Circuit: Description
When the brake pedal is depressed, the stop light switch assembly sends a signal to the ECM. When the ECM receives this signal, it cancels the cruise control.
The fail-safe function operates to enable normal driving even if there is a malfunction in the stop light signal circuit.
The cancel condition occurs when positive battery voltage is applied to terminal STP.
When the brake is applied, positive battery voltage is normally applied to terminal STP of the ECM through the STOP fuse and the stop light switch assembly and the ECM turns the cruise control off.
DTC DETECTION CONDITION CHART
| DTC No. | DTC Detection Condition | Trouble Area |
|---|---|---|
| P0571/52 | This trouble code is output when the voltage of the STP terminal and that of the ST1 -terminal on the ECM are below 1 V for 0.5 sec. or more. |
|