Brake Pipe: Removal

WARNING: This page is about a different car, the 2007 Subaru Outback and 2007 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Airbag system wiring harness is routed near the center brake pipe.

CAUTION:

All airbag system wiring harness and connectors are colored yellow. Do not use the electrical test equipment on these circuits.
Be careful not to damage the airbag system wiring harness when servicing the center brake pipe.
When removing the brake pipe, make sure that it is not bent.