LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Subaru >> 2019 >> Forester Base >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Transmission Control System >> AT Shift Lock Solenoid and "P" Range Switch >> Removal >> Solenoid Unit
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Solenoid Unit

  1. Remove the select lever. Ref. to CONTROL SYSTEMS>SELECT LEVER>REMOVAL 
  2. Remove the spacer and gasket, Ref. to CONTROL SYSTEMS>SELECT LEVER>DISASSEMBLY>SELECT LEVER .
  3. Remove the connector from plate.
    G13225483Courtesy of SUBARU OF AMERICA, INC.
  4. Raise the claw with a flat tip screwdriver, etc. and remove the solenoid unit.
    G10319330Courtesy of SUBARU OF AMERICA, INC.
  5. Pull out the terminal (A) of the solenoid unit using KTC connector terminal tool (part number: ECC-1T).
    NOTE: A flat tip precision screwdriver with a tip width of 1.3 mm (0.05 in) or less can also be used.
    G13225524Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals