Inspection Procedure
WARNING: This page is about a different car, the 2002 Toyota Land Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Check the door lock control switch (See INSPECTION
)
.
- OK: Go to next step.
- NG: Replace the door lock control switch.
- Check wire harness and connector between door lock control switch and Body ECU
.
- OK: Go to next step.
- NG: Repair or replace wire harness or connector.
- Check wire harness and connector between door lock control switch and power window master switch.
- OK: Proceed to next circuit inspection shown on problem symptoms table (See PROBLEM SYMPTOMS TABLE ).
- NG: Repair or replace wire harness or connector.