Passenger's Under-Dash Fuse/Relay Box Removal/Installation

Passenger's Under-dash Fuse/Relay Box Removal/Installation

SRS components are located in this area Review the SRS component locations. Locations and precautions and procedures Service and Repair before performing repairs or servicing.

Removal

1. Do the battery terminal disconnection procedure. Procedures

2. Remove the right front door sill trim and right kick panel. Interior Trim Removal/Installation - Front Door Sill Area

3. Disconnect the connectors from the passenger's under-dash fuse/relay box (A).

4. Remove the mounting bolts and remove the passenger's under-dash fuse/relay box.

5. Carefully remove the relays using the relay puller, then release the tab (B) and remove the right kick panel mounting bracket (C).
NOTE: Do not use pliers. Pliers will damage the relays, which could cause the engine to stall or not start.






Installation

1. Install the passenger's under-dash fuse/relay box in the reverse order of removal.

2. Install the relays and connectors to the passenger's under-dash fuse/relay box.

3. Install the removed parts in the reverse order of removal.

4. Do the battery terminal reconnection procedure. Procedures

5. Confirm that all systems work properly.