Passenger's Power Window Switch Test/Replacement

Passenger's Power Window Switch Test/Replacement

1. Remove the passenger's door armrest Front Door Panel Removal/Installation.

2. Disconnect the 10P (or 14P)* connector (A) from the passenger's power window switch (B).






Front Passenger's





Rear





3. Remove the three screws and the switch.

4. Swap the power window switch with another known-good switch and test. If the original window switch is faulty; replace it.

5. Install the switch in the reverse order of removal.

6. After replacement, reset the power window control unit Testing and Inspection.