Hybrid/EV Battery Pack Data Reset

Hybrid/EV Battery Pack Data Reset

The Hybrid/EV Powertrain Control Module 2 Data Reset procedure must be completed when the following components are replaced:

* Hybrid/EV Powertrain Control Module 2

* Hybrid/EV Battery Energy Control Module

* Hybrid/EV Battery Interface Control Module

* Hybrid/EV Battery Pack

The Hybrid/EV Powertrain Control Module 2 Data Reset procedure can be completed with a scan tool using the following steps:

1. Install the scan tool to the data link connector.

2. Vehicle in Service Mode, engine OFF.

3. Select Hybrid/EV Battery Pack Data Reset in the Hybrid/EV Powertrain Control Module 2 Control Functions list

4. Follow the scan tool directions to complete the procedure.

5. Clear any DTCs that may be set.