Front Display Interface Module (FDIM)

Front Display Interface Module (FDIM)

NOTE: Without navigation shown, with navigation similar.










Removal and Installation

1. NOTE: Module configuration is required when a new Front Display Interface Module (FDIM) is being installed.

Upload the FDIM configuration information to the scan tool.

2. Remove the center instrument panel finish panel.

3. NOTICE: For vehicles with navigation, make sure not to bend the FDIM video feed cable when removing the FDIM.

Remove the 4 screws and the FDIM.
- Disconnect the electrical connector.

4. To install, reverse the removal procedure.
- Download the configuration information to the FDIM.