X152 - Check If FPA PID is On With Key On Engine Off

NOTE: The Scan Tool must be connected to a reliable power source that is powered with the ignition key in the "START" position (e.g. directly to the vehicle battery). Also verify that the vehicle battery is fully charged.

- Key On.

- While viewing FPA PID, crank engine.

- is the FPA PID on during crank?

YES -- GO to X153. X153 - Check If FPM PID Is Off With Key On Engine Off

NO -- Key Off. GO to X16O. X160 - Check FP Circuit For Short To Power In CCRM