Test J: The Climate Controlled Seat Module Does Not Respond To The Diagnostic Tool

PINPOINT TEST J: THE CLIMATE CONTROLLED SEAT MODULE DOES NOT RESPOND TO THE DIAGNOSTIC TOOL

J1:

J2-J3:

Normal Operation
The climate controlled seat module communicates with the diagnostic tool through the medium speed controller area network (CAN), circuits VDB06 (GY/OG) and VDB07 (VT/OG).

Check the medium speed CAN circuits VDB06 (GY/OG) and VDB07 (VT/OG) between the climate controlled seat module C3305c and the data link connector (DLC) C251. The total resistance values must not be more than 5 ohms. If the resistance is more than 5 ohms there is an open in one of the medium speed CAN circuits, damage to the DLC C251, damage to the climate controlled seat module C3305c, or a problem in an in-line connector.

Possible Causes
- medium speed CAN data plus circuit VDB06 (GY/OG) open
- medium speed CAN data minus circuit VDB07 (VT/OG) open
- climate controlled seat module C3305c
- climate controlled seat module