Test T: No High Speed Controller Area Network (HS-CAN) Communication, All Modules Are Not Responding

PINPOINT TEST T: NO HIGH SPEED CONTROLLER AREA NETWORK (HS-CAN) COMMUNICATION, ALL MODULES ARE NOT RESPONDING

Normal Operation
The HS-CAN uses an unshielded twisted pair cable, circuits VDB04 (WH/BU) and VDB05 (WH).

This pinpoint test is intended to diagnose the following:
- Wiring, terminals or connectors
- PCM
- ABS module
- Accessory protocol interface module (APIM) (if equipped)
- Transmission control module (TCM)
- 4X4 control module (if equipped)
- Instrument cluster (IC)
- Occupant classification system module (OCSM)
- Restraints control module (RCM)

T1-T2:

T3-T4:

T5-T7:

T7-T8:

T9-T11:

T11-T13:

T13-T16:

T16-T18:

T18-T21:

T21-T23:

T23-T26:

T26-T28:

T28-T30:

T31-T34:

T35-T38: