Front Controls Interface Module (FCIM)

Front Controls Interface Module (FCIM)

Front Controls Interface Module (FCIM)









Removal and Installation

1. Remove the upper finish panel. For additional information, refer to Instrument Panel and Console Instrument Panel Finish Panel.

2. Remove the 4 Front Controls Interface Module (FCIM) finish panel screws and rotate upwards from the bottom to release the 3 clips. Remove the Front Controls Interface Module (FCIM) finish panel.
- Disconnect the electrical connector.





3. Remove the 4 screws from the FCIM and remove the FCIM from the finish panel.





4. To install, reverse the removal procedure.