Seat Disassembly/Reassembly - Passengers

Seat Disassembly/Reassembly - Passenger's

Special Tools Required

- KTC trim tool set SOJATP2014*

'06-09 Models

- SRS components are located in this area. Review the SRS component locations for the appropriate model:

- '06-09 models Locations

- Also review the precautions and procedures Technician Safety Information before doing repairs or service.

- The passenger's weight sensor unit must be calibrated after any of these actions:

- Replacement of the seat weight sensors

- Replacement of the seat weight sensor unit

NOTE:

- Use the appropriate tool from the KTC trim tool set to avoid damage when removing components.

- Take care not to scratch the body or tear the seat covers.

- Put on gloves to protect your hands.

- Make sure the bushing and the pivot washer are installed correctly.

- Apply multipurpose grease to the moving portion of the seat track.

- To prevent wrinkles in the seat-back cover, stretch the material evenly over the pad.

- Adjust the connecting cable as necessary.

- Make sure the connecting cable is installed properly.