Power Window Master Switch Test/Replacement

Power Window Master Switch Test/Replacement

1. Remove the power window master switch panel Service and Repair.






2. Check for continuity between the terminals in each switch position according to the tables.

Front Passenger's Switch





Left Rear Switch





Right Rear Switch





Driver's Switch

The driver's switch is combined with the control unit so you cannot isolate the switch to test it. Instead, run the power window master switch input test procedures Power Window Master Switch Input Test. If the tests are normal, the driver's switch must be faulty. Replace the switch.

3. If the continuity is not as specified, remove the screws and replace the switch.

4. Install the switch in the reverse order of removal.