Drive Belt: Service and Repair

Drive Belt Replacement

Special Tools Required

- Belt Tension Release Tool Snap-on YA9317, commercially available
*: Available through the Honda Tool and Equipment Program 888-424-6857.

1. Move the drive belt auto-tensioner (A) using the belt tension release tool (YA9317) in the direction shown to relieve tension from the drive belt, then remove the drive belt.





2. Install a new belt in the reverse order of removal.

3. Check the position of the drive belt auto-tensioner indicator (A) is within the standard range (B) as shown. If it is out of the standard range, check the drive belt auto-tensioner Testing and Inspection.