Engine Block

ENGINE BLOCK

Components (Part 1):

Components (Part 2):

REMOVAL
1. Remove the drive plate(A).





2. Remove the rear plate(A).





3. Remove timing belt.
4. Remove intake manifold.
5. Remove exhaust manifold.
6. Remove generator from engine.
7. Remove power steering pump from engine.
8. Remove cylinder head.
9. Remove A/C compressor from engine.
10. Remove water pump assembly.

INSTALLATION
1. Install the water pump.
2. Install the air conditioning compressor.
3. Install the cylinder head.
4. Install the power steering pump.
5. Install the generator.
6. Install the intake manifold.
7. Install the exhaust manifold.
8. Install the timing belt.
9. Install the rear plate(A).





10. Install the drive plate(A).