Entry Functions Do Not Operate at All

DOOR LOCK: SMART ACCESS SYSTEM WITH PUSH-BUTTON START: Entry Functions do not Operate at All
- Entry Functions do not Operate at All

DESCRIPTION

When the entry functions do not operate at all, it is possible that the certification ECU is malfunctioning or that the wire harness leading to the certification ECU is short-circuited.

INSPECTION PROCEDURE

PROCEDURE

1. CHECK KEY CANCEL FUNCTION

(a) Check that the key cancel function is set.

OK:

Key cancel function is set.

OK -- END (UNSET KEY CANCEL FUNCTION)
NG -- Continue to next step.

2. CHECK WIRE HARNESS (CERTIFICATION ECU ASSEMBLY - BATTERY AND BODY GROUND)





(a) Disconnect the U28 ECU connector.

(b) Measure the voltage and resistance of the wire harness side connector.

Standard voltage:





Standard resistance:





NG -- REPAIR OR REPLACE HARNESS AND CONNECTOR

OK -- REPLACE CERTIFICATION ECU ASSEMBLY