Windshield Washer Reservoir: Service and Repair

WASHER TANK REMOVAL/INSTALLATION

1. Disconnect the negative battery cable.

2. Remove the front bumper. (See Removal and Replacement.)

3. Disconnect the windshield washer motor connector and windshield washer hose.











4. Disconnect the rear washer motor connector and rear washer hose. (5 door)

5. Disconnect the washer fluid-level sensor connector. (Vehicles with the washer fluid-level sensor)

6. Remove the bolts and nut, then remove the washer tank.

7. Install in the reverse order of removal.