Front Console Component Removal/Installation

FRONT CONSOLE COMPONENT REMOVAL/INSTALLATION

1. Shift lever to neutral position.

2. Remove the following parts:
a. Rear console Rear Console Removal/Installation

b. Side wall Side Wall Removal/Installation

c. Shift lever knob (MTX) Service and Repair

3. Remove the screws, then pull the lower side of the front console component in the direction of the arrow, and remove the clips.






CAUTION:
- Affix protective tape to the AT shift panel to prevent scratches or damage. (ATX)






4. Install the boot panel and front console as a single unit.

5. Install in the reverse order of removal.