Windshield Washer Reservoir: Service and Repair

WASHER TANK REMOVAL/INSTALLATION

Vehicles with the washer fluid-level sensor

1. Disconnect the negative battery cable.

2. Remove the front bumper. Front Bumper Removal/Installation

3. Remove the front combination light on the left side. Service and Repair

4. Remove in the order indicated in the table.

5. Install in the reverse order of removal.









Vehicles without the washer fluid-level sensor

1. Disconnect the negative battery cable.

2. Remove the front bumper. Front Bumper Removal/Installation

3. Remove the front combination light on the left side. Service and Repair

4. Remove in the order indicated in the table.

5. Install in the reverse order of removal.









Washer Hose Installation Note

1. Install the washer hoses by inserting them in the washer tank grooves as shown in the figure.