Aerodynamic Under Cover No. 1 Removal/Installation

AERODYNAMIC UNDER COVER NO.1 REMOVAL/INSTALLATION

1. Remove the aerodynamic under cover No.2. (See Aerodynamic Under Cover No. 2 Removal/Installation)

2. Peel off the front mudguard. Service and Repair

3. Remove the bolts and fastener.






4. Remove the aerodynamic under cover No.1 in the direction of the arrow shown in the figure.

CAUTION:
- Be careful not to damage the aerodynamic under cover No.1 during removal.

5. Install in the reverse order of removal.