Rearview Mirror Replacement

Rearview Mirror Replacement

Removal Procedure




1. Loosen the screw in the base of the mirror.
2. Remove the mirror from the mounting pad.
3. Disconnect the rearview mirror wiring harness, if applicable.

Installation Procedure




1. Install the mirror to the mounting pad.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Tighten the screw that retains the mirror base to the mounting pad.

Tighten the mirror set screw to 2 Nm (18 lb in).

3. Install the rearview mirror wiring harness, if applicable.