LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1990 >> Integra LS, 2D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Basic Testing >> Ignition Checks >> Electronic Ignition System >> Ignition Coil Resistance (Integra)
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Ignition Coil Resistance (Integra)

  1. Remove distributor cap. Remove 2 Phillips screws retaining primary ignition leads. Remove primary leads from ignition coil. Using an ohmmeter, check resistance between primary terminals "A" and "B" on ignition coil. See Figure . Resistance should be .6-.8 ohms at 70°F (20°C).
  2. Check secondary resistance between terminal "A" and secondary terminal (coil tower). Resistance should be 9760-14,640 ohms at 70°F (20°C). Replace coil if readings are not within specifications.
scientia non olet · About LEMON Manuals