LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Acura >> 1992 >> Integra GS-R >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Engine Controls - System/Component Tests) >> Miscellaneous Controls >> Cooling Fan >> Cooling Fan Motor Relay
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Cooling Fan Motor Relay

WARNING: This page is about a different car, the 1992 Acura Legend. However, it is still accessible from the selected car via links, so may be relevant.
  1. Relay is located in relay box behind radiator, on left side. Remove relay. Check for continuity between relay terminals "B" and "C." See Fig 1 . Continuity should exist. Check for continuity between relay terminals "A" and "C." Continuity should not exist. Replace relay if continuity is not as specified.
    Fig 1: Main Fan Relay Terminal ID
    G92B25248Courtesy of AMERICAN HONDA MOTOR CO., INC.
  2. Using fused jumper wires, connect 12-volt battery power and ground to terminals "D" and "E". Check for continuity between relay terminals "B" and "C." Continuity should not exist. Check for continuity between relay terminals "A" and "C." Continuity should exist. Replace relay if continuity is not as specified.