Seat Memory Sensor
CAUTION:
Disconnect power from motor immediately when motor stops.
Remove driver's seat. Unplug memory sensors and motor connectors. Connect the power terminals and ohmmeter test leads to each terminal. See SEAT MEMORY SENSORS table. See Fig 1 . Check that the needle in the ohmmeter moves from left to right. If motor does not run, reverse the test leads. If the motor still does not run, it is defective.
SEAT MEMORY SENSORS
| Sensor | Power Terminals | Test Leads |
|---|---|---|
| Slide | A-B | I-J |
| Recline | E-F | G-H |
| Front Up/Down | M-N | O-P |
| Rear Up/Down | C-D | K-L |