Main Switch
- Remove main switch from instrument panel. With switch off, check for continuity between switch terminals "B" and "C", and between terminals "D" and "E". See Fig 1
. If continuity exists, go to next step. If continuity does not exist, replace defective bulb. After replacing bulb, repeat test. If switch continuity is not as specified, replace main switch.
- Turn switch on. Check for continuity between main switch terminals "A" and "B", "B" and "C", and "D" and "E". If continuity exists, switch is okay. If continuity does not exist, between main switch terminals "A" and "B", replace switch. If continuity does not exist between main switch terminals "B" and "C" or terminals "D" and "E", go to next step.
- Replace defective bulb inside main switch. After replacing bulb, repeat step 2). If continuity is not as specified, replace main switch.
Courtesy of AMERICAN HONDA MOTOR CO., INC.