Set/Resume Switch
- Remove steering wheel. Unplug SET/RESUME switch connector from cable reel. Check for continuity between SET/RESUME switch connector terminals "A" and "C" with SET pressed. See Fig 1
. If continuity exists, go to next step. If continuity does not exist, replace SET/RESUME switch. See SET/RESUME SWITCH under REMOVAL & INSTALLATION
.
- Check for continuity between SET/RESUME switch connector terminals "B" and "C" with RESUME pressed. If continuity exists, SET/RESUME switch is okay. If continuity does not exist, replace SET/RESUME switch. See SET/RESUME SWITCH under REMOVAL & INSTALLATION
.
Courtesy of AMERICAN HONDA MOTOR CO., INC.