October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Driver's Window Motor Test

Remove door panel. Unplug connector from motor. Using fused jumper wire, connect terminal No. 1 to battery voltage. Connect terminal No. 2 to ground. See Fig 1 . Motor should run in "up" direction. Transpose jumper wires. Motor should run in "down" direction. Replace motor if it does not run smoothly in both directions.

Fig 1: Driver's Window Motor Terminal ID

Courtesy of AMERICAN HONDA MOTOR CO., INC.