October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Relay Test

Remove relay to be tested. See Figure . Using an ohmmeter, check for continuity between terminals "C" and "D". See Fig 1 . Continuity should exist. Apply battery voltage between terminals "C" and "D". Continuity should exist between terminals "A" and "B". If relay fails any of these tests, replace relay.

Fig 1: Identifying Relay Connector Terminals

Courtesy of AMERICAN HONDA MOTOR CO., INC.