Installation

1. If the catalytic converter is a replacement, torque the Heated Oxygen Sensor (HO2S) to 44 Nm (33 ft lb).
2. Install new gaskets.
3. Install heat shields and torque bolts to 10 Nm (7 ft lb)
4. Install catalytic converter side with 3 studs first, and tighten nuts to 33 Nm (25 ft lb)
5. Install 2 nuts and bolts from catalytic converter to exhaust manifold and torque to 22 Nm (16 ft lb)
6. Connect the HO2S connector.