Connecting Rod, Engine

Standard Journal Diameter
Main Bearing [04]
Crank Pin 1.7707-1.7717 inches

Out Of Round [01] 0.0002 inches
Taper [01] 0.0002 inches
Endplay 0.0040-0.0140 inches
Bearing Clearance
Main Bearing [03]
Connecting Rod Bearings 0.0013-0.0020 inches
Connecting Rod Endplay [02] 0.0060-0.0120 inches

[01] -- Maximum.
[02] -- Installed on crankshaft.
[03] -- Nos. 1-2-4-5, 0.0009-0.0017 inches; No. 3, 0.0012-0.0019 inches.
[04] -- Nos. 1-2-4-5, 2.1644-2.1654 inches; No. 3, 2.1643-2.1653 inches.